Topic

OpenClaw on Raspberry Pi

Guides for running OpenClaw agents on Raspberry Pi hardware, from first boot to long-running deployments. These pages cover the small-computer end of agent work: sensors and cameras, home and network services, self-hosted media and monitoring, industrial and robotics builds, and the storage question every one of them eventually hits, which is where the files an agent produces on a device should live so a person elsewhere can open them. Fast.io fits that last part through workspaces the agent writes to over the REST API, the CLI, or the MCP server.

Most of these builds start the same way, with one Pi doing a single job well, and then grow into something a household or a workshop quietly depends on. The pages assume you can reach a shell and are comfortable editing a config file, and they say up front when a project needs specific hardware. Where an agent produces recordings, logs, or images that matter to someone, they cover getting that data off the device before the card fills up.

192 guides in this topic.

Start here

Best Raspberry Pi Projects for OpenClaw AI Agents Raspberry Pi OpenClaw projects turn affordable single-board computers into always-on AI agents for home automation, messaging bots, and secure file delivery. This guide covers... How to Build a Portable Pen Testing Rig with OpenClaw and Kali Linux on Raspberry Pi A portable Kali Linux rig with an OpenClaw agent on a Raspberry Pi turns manual pen testing into an orchestrated workflow. This guide covers the hardware, the Kali flash, the... How to Build a Wireless Sensor Decoder Agent with RTL-433 and OpenClaw on Raspberry Pi rtl_433 decodes signals from over 320 wireless device protocols using a cheap USB radio dongle. Pairing it with an OpenClaw AI agent on a Raspberry Pi gives you anomaly detection,... How to Build a Pool Water Quality Monitor with OpenClaw on Raspberry Pi Commercial pool monitors display readings on a screen. They tell you the pH is 7.1 but not what to do about it. This guide covers wiring pH, ORP, and temperature sensors to a... How to Build an EV Charger Monitoring Agent with OpenClaw on Raspberry Pi Most Raspberry Pi EV charger projects stop at the protocol layer: read OCPP data, display it on a dashboard, done. This guide adds an AI reasoning layer. An OpenClaw agent running... How to Build a mmWave Radar Presence Detection Agent with OpenClaw on Raspberry Pi PIR sensors miss people who sit still. mmWave radar does not. This guide covers wiring a 24GHz FMCW radar module to a Raspberry Pi, reading presence and distance data over UART or...

All guides

Related topics

All topics / Resource library